DIGITEN WTC200 Wireless Temperature Controller Thermostat Outlet Remote Control Thermometer with 2m/6ft NTC Temp Sensor Probe Heating Cooling Mode for Fan Heater Greenhouse Homebrewing Reptile
$29.99
Price: $29.99
(as of Nov 01, 2025 11:22:30 UTC – Details)
Product description
The wireless thermostat will automatically turn on/off heating or cooling devices through your preset target temperature. Control Cooling and Heating device, Monitor room temperature.
Specifications
Load Capacity: 100-240VAC 15A, 1650W@110VAC, 3300W@220VACRemote Batteries Required: 2×1.5V AAA (Not Included)Transmission Distance: 50-100mMeasuring Temperature Range: -10℃~80℃, 14℉~176℉Temperature Accuracy: ±0.1℃/℉High/Low Temperature Alarm: 0℃~80℃/32℉~176℉Remote Refresh Frequency: 20 SecondsTemperature Probe: Plug In The Receiver
Note, Multiple sets of equipment will not interfere with each other. if you want one remote to work only one outlet, when pairing, please remove the batteries of other remotes and keep only one remote control is in active (power on) state.
Directly connect to cooling or heating device after setting.Set Run＞Stop, it will be in cooling mode.Set Run＜Stop, it will be in heating mode.
Temperature is detected by the receiver.Can be monitored and contorlled in different rooms with 50-100m.
The Low alarm and High alarm are not equal to the Run temperature and Stop temperature.The High alarm and Low alarm are turned off by default.To turn on the alarms, long press and hold the SET button, then press the DOWN/UP button to set the High/Low alarm velue you desire on the High/Low page.
2m/6ft probe cable.The NTC probe is waterproof.Place the probe where the temperature needs to be detected.
Wide Range Application: Home brewing, Wine cellar, Green house, Aquarium temp control, Breeding and Incubation, Baby room, Mushroom, etc.
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.3 out of 5 stars 681
4.3 out of 5 stars 681
4.0 out of 5 stars 1,359
4.0 out of 5 stars 1,359
Price
$29.99$29.99 $29.99$29.99 $25.99$25.99 $25.99$25.99
Heating
✓
✓
✓
✓
Cooling
✓
✓
✓
✓
Remote range
50-100m 50-100m 50-100m (isothermal open space) 50-100m (isothermal open space)
Maximum Output Load
15A, 1650W@110VAC, 3300W@220VAC 15A, 1650W@110VAC, 3300W@220VAC 15A, 1650W@110VAC, 3300W@220VAC 15A, 1650W@110VAC, 3300W@220VAC
Where Is the Sensor
Plug-in the Receiver Plug-in the Receiver Built-in the Remote Built-in the Remote
Who Detects Temperature
Receiver (Outlet) Receiver (Outlet) Remote Remote
Control Temp Range
0℃~70℃ or 32℉~158℉ 0℃~70℃ or 32℉~158℉ 0℃~70℃ or 32℉~158℉ 0℃~70℃ or 32℉~158℉
📡【Wireless Remotely Control】: Remotely set and control, portable design, which is more convenient and handy. Communication range is 50-100m in open area. It can save all settings even if the power failure.
🕹️【Easy to Use And Program】: Accurate reading temperature for LCD display with back light. Freely switch between ℃ and ℉.
💰【Save Money】: The thermostat will make your life not only comfortable but energy efficient. The thermostat turns on and off appliances connected to outlet based on the target temperature, thus saving money on your electric bill while maintaining comfort.
💯【High Accuracy And Safe】: Come with a highly accurate temperature sensor, ambient temperature is detected automatically by the sensor on the receiver socket. High and low temperature alarms are available, the maximum load can reach 15A, 1650W.
🎈【Widely Used】: Widely used for greenhouse,mushroom house, reptiles breeding, pet feeding, wine cellar, cigar storage, home brewing, seed germination, fermentation, baby room, attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater, garage, etc.
Customers say
Customers find the thermostat works effectively from up to 200 feet away and keeps room temperature stable, with accurate temperature control and good value for money. However, the ease of use receives mixed feedback – while some find it fairly easy to program, others say it’s not super intuitive. Moreover, the remote control functionality is also mixed, with some appreciating the ability to see present temperature while others note it’s not actually remote-controlled. Additionally, customers report unclear instructions and durability issues, with some units breaking within days of use.
13 reviews for DIGITEN WTC200 Wireless Temperature Controller Thermostat Outlet Remote Control Thermometer with 2m/6ft NTC Temp Sensor Probe Heating Cooling Mode for Fan Heater Greenhouse Homebrewing Reptile
Add a review
Related Products
$29.99
Vivian J Mead –
Better replacement for outlet timers and works great!!
Works as advertised and accurate!I dock a stare on temp control because unit may interchange from Fahrenheit to Celsius however the thermostat is controlled is Celsius. For example, if I set the temperature at 70.0F it set the thermostat is Celsius thus a/c turns on at 69.8F or 21.0C. Having that said, if you are using Celsius that wouldn’t be a problem.I dock user interface as when the device is set at curtain temperatures in Fahrenheit it will automatically change the temp, this problem collates with temperature control. In addition, if the unit is set to 65.0 F it will set your thermostat in Celsius, so when you switch to Celsius and back to Fahrenheit it will display 64F, instead of 65F as the unit was set. Not to finicky.In conclusion, well functioning device, however I would either recommend the device be able to set temp by decimal or unit being able to program through both °F and °C instead of just programming thermostat in °C and just displaying °F over °C.
englishrupe01 –
Excellent!
I have not been using this long but it works perfectly. My wife makes wine and in the winter we store it in glass demijohns in an outdoor shed, as it would be too hot to leave in our cabin with the woodstoves during winter. After all that work, we would hate to lose all that wine (maybe 50 gallons) if the glass fractured from freezing. So we set them under a table with a blanket over it and use this thermostat to turn on a set of light bulbs for gentle heat, under the table and blanket. This uses very little power and seems to keep the temperature pretty constant throughout the cold days and even colder nights. As well as turning the power on and off this thing also gives us an alarm if the temperature should ever get close to freezing, so we can move the wine in an emergency. A really useful tool for us. Oh, and we have the one with the probe.
jeff –
Server rack thermostat and fan control
Works well. Not very clear on instructions to set it up. It’s doable it just takes a few minutes. I don’t know if it’s the angle my screen is mounted it’s not as easy to read. Other than that works well and temp settings are very precise.
APOHOPPER –
Very happy with this!
Have had this for I think 2 years now installed in our bathrooms of our unheated cabin. It is connected to a Envi Heater and we set it to keep the bathroom from freezing. It is set to run at 50 degrees and turn off at 55 degrees when we are not there. When we come I turn it up to 68-70 degrees and it kicks the heater right on. Has worked flawlessly and exactly how I wanted. Bought one version that is wired and one that is wireless. I prefer the wireless for asthetics.
SP –
Does its job well.
Does its job well.
rbpeirce –
Mine had very accurate readings [but poor battery life!]
I just got this and will follow up if necessary.All is explained if you actually bother to read the manual.This does not come with batteries! That’s a first for any battery operated device I have bought. I put in a couple NiMH batteries and it worked fine.Mine is dead accurate. I placed a thermometer next to it and it read 66.6° when the thermometer, which only reads in whole degrees, said 67°.As others have stated, the screen seems to be upside down. OTOH, if you set it on a desk it does display properly. Be that as it may, the orientation sucks. You should be able to read it head on. If you hang the remote on a wall, hang it high.Since I can return it within 30 days I will continue to test it. Most electronic devices that make it thru the first 30 days are usually ok. I’ll follow up if it fails.Update 2/1/24: It occurred to me the temperature difference problem people have mentioned could be traced to the temperature probe. I have temperature probes on my heat pumps to read outside temperatures and they differ by about 3°.Update 10/8/24: I replaced my batteries and they died in 8 days! I’m trying new batteries but I’m going away for two weeks. We’ll see if they last. The company says batteries should be good for six months and reviews indicate long life but I’m not getting it. I use NiMH rechargeable batteries and I may need Alkaline batteries. I’m going away for 2.5 months in November so I’ll have to get some Alkalines to see how they stand up.Update 10/26/24: Fresh batteries lasted less than three weeks. I’m replacing this unit with one that is NOT remote controlled and doesn’t need batteries.
Z. Shopperson –
Keeps room temp stable. Saves electricity.
I use them to control space heaters in the bedrooms while I keep the main thermostat of the (large) house on a lower temperature. This saves a lot on the electricity bill. Also, using them makes the space heaters run at a constant level, which also saves electricity. Contrary to what some reviewers have said, programming them is easy and battery life is good. They paid for themselves in the first month.
Richard M. Vazquez –
Highly accurate temperature control
I liked combination of the control of the fireplace with the Durablow low voltage wall outlet system with the Digiten WTC200 Wireless Temperature Controller Thermostat Outlet Remote Control to control a fan on my mantle.The Durablow remote control senses the desired room temperature to start the gas fireplace set to 73 degrees F. The Durablow remote shuts down the fireplace via low voltage wall switch when the desired room temperature set on the remote has been reached.I attached the wirelessly switched Digiten WTC200 wall outlet with its 6 foot long wire with temperature + thermistor to sense the air temperature over the fireplace mantle. I control the fan on the mantle using temperature sensitive Digiten WTC200 remote control room temperature sensor to turn on the fan on the mantle when the ambient air temperature exceeds 79 degrees then turn the fan off when that temperature falls to 74 degrees.Please see the video.
Peter Fullerton –
Should consider a WIFI, app enabled control for remote monitoring
Lyle B –
I use this to monitor an attached utility/ mechanical room that has no heat.I plugged in a small heater and it works great.Can easily check what is happening remotely and thermostat control is quite precise.Has a high temperature alarm and a very good working temperature range.
ã«ããã好ã好㠖
天äºè£ææ°æã¨ãå°å±ææ°æï¼åãåæã«ä½¿ç¨ãã¦ãããæ··ä¿¡ãç¡ã温度ãæ£ç¢ºããªããã¢ã¼ã¹ç«¯åã¯ã°ã©ã¤ã³ãã¼ã§åæãã¦ä½¿ç¨ãã¦ããã¾ãããããªã«ããç©ãä¸è¯è£½ã«ããã®ã«æ¥æ¬é å¼µãï¼
Wang –
Been working good for me
Maru –
è¨å®ã¯è³ã£ã¦ç°¡å