AC Infinity CLOUDFORGE T3, Plant Humidifier 4.5L with VPD Humidity Controls, 10-Level Precision Vaporizer, Extendable Targeting Hose and No-Leak Seal for Grow Tents

Awesome Grow Tent Humidifier
I have several of these and they have never let me down. Easy to setup, easy to monitor and control what more could you ask for.

It is humid in here
This review is for the AC Infinity CLOUDFORGE T7 Plant Humidifier for Grow Tents, 15L, VPD Humidity Controls, 10-Level Precision Vaporizer, Extendable Hose, Targeting Pipe, No-Leak SealI am so excited to write this review. Almost as excited as when a saw this humidifier work for the first time. I have a 10ft x 10ft greenhouse. It is very important that during the winter I keep it at a temp between 65 degrees – 70 degrees F It requires two milkhouse heaters to maintain that temp differential. As the weather gets colder, they run more. As they run, they dry out the greenhouse. My previous humidifier was an evaporation version. It worked really hard to keep up with the heaters. Then I found this humidifier. WOW! This humidifier works much better than five of the other one. In the description its name is CLOUD FORCE. That is exactly what you get. It comes with several different attachments, but the one I use sends the water vapors up about 2ft above the humidifier and then has a 5 hole distributor on top to send the water vapor in 5 different directions. When it is going full blast, it creates a cloud of vapor in my greenhouse where visibility is almost zero. I have the controls set at full blast because I have it plugged into my greenhouse humidistat that monitors the humidity and turns the humidifier on and off as needed. I am so happy the humidifier remembers its settings even when its power is cut off. As I said earlier, my old humidifier had to struggle getting the humidity to an acceptable level. This new one can change the humidity in the greenhouse from 20% to 80% in a matter of minutes. I have a monitor in the room that graphs temp and humidity as well as other parameters. The humidity graph when I turn on the humidifier has a very sharp vertical spike as the humidity raises. Then when it is on auto mode with my humidistat, I get a zigzag pattern as the unit is turned off and on the maintain humidity between 65% and 70%. As long as I can keep it filled with water, the humidifier has no problem maintaining the humidity levels. I am using distilled water to run the device because it cuts down on deposits from the water. This device can pump out 4 gallons of water easily in a day. I was going to go broke buying distilled water, so I bought a distiller to make my own. That is working out great. When the device runs out of water, it turns off the vapor making and just flashes the screen to let you know it needs to be filled.The other day I heard a noise which sounded like it came from the bottom of the humidifier. I could not be sure if it was the humidifier or one of the heaters. It sounded like a bad bearing in a fan motor like older computers make when their fan is going out. I immediately contacted AC Infinity to report a possible problem with the device. They responded the next day with an offer to replace the unit. I told them that I wanted to research whether the problem was with their device or my heater. The problem is that testing each device has not demonstrated the problem again. So, I can’t yet tell which one it is. They told me to keep monitoring the problem and if it occurred again and it is the unit, they would replace it. That is exceptional customer service. I said I was excited to write this review because this is truly an amazing device and customer service is great. What more could you ask for. I can will try to post some pictures, but will depend on how well my phone cooperates with the Amazon review feature. I will try to show the humidifier creating its cloud and also the graph of how steady this humidifier functions when it has water. The spikes that go down quickly are where the humidifier runs out of water. I easily give this device and the company 5 stars.

Very flexible humidity control with only a very minor design flaw
TL;DR: Tried several humidifiers for my greenhouse but none worked until I got the 4.5L Cloudforge. It’s powerful, affordable, and maintains high humidity perfectly. Only drawback: the flimsy lid needs a locking mechanism. Overall, I am very impressed!After testing a few wick humidifiers recently, including the 4-gallon Vornado, I was still unable to reach the humidity level I needed for a small greenhouse (100%). Eventually, I decided to try this brand after considering Vivosun, a brand I’ve relied on for quality garden products in the past. Unfortunately, their store only offered a large reservoir humidifier, which was far beyond my needs.I purchased the 4.5L Cloudforge and was very impressed after setting it up. The humidity control options are excellent. It immediately produced a substantial amount of vapor and quickly humidified the greenhouse. I set it to auto-cycle on and off every hour, and it has worked flawlessly.The only downside is the lid that connects to the hose. It’s extremely flimsy and lightweight, and they should have included a locking mechanism to prevent the lid from coming off of the unit if the hose is bumped. If this design flaw was addressed, this would be a five-star product. Overall, it’s a purpose-built, affordable humidifier that works exceptionally well in high-humidity environments. Very impressed for a first-time customer!

Spot on bit of kit!

Produce mucho vapor normalmente lo tengo en nivel 1 y mas que suficiente incluso a ratos lo debo de apagar. y si lo manejas con el modulo todos los ajustes quedan desde mi celular. Muy recomendable.