DIGITEN DHTC1011 Humidity and Temperature Controller Plug-in Thermostat Humidistat Outlet Humidity Controller Greenhouse Thermostat Cooling Heating Humidifier Dehumidifier
$39.99
Price: $39.99
(as of Oct 26, 2025 04:40:09 UTC – Details)
Product description
DHTC1011 is an integrated plug-and-play temperature and humidity controller. It has a temperature and humidity integrated probe and is pre-connected to two outlets to control temperature and humidity simultaneously. The large LCD screen can display measured temperature/humidity and set temperture/humidity at the same time.
It can be used as over temperature protection and automatic temperature and humidity control system for various electric appliances such as equipment for home-brew, pet breeding, incubation, room temperature and humidity control, culture and fermentation equipment, wine cellar temperature and humidity monitoring equipment, etc.
Temperature Control Range -40~120℃/ -40~248℉ Humidity Control Range 1-100%RH Input Power 100~240VAC, 50/60Hz Sensor Length 2m/6ft Temperature Relay Capacity 15A, 100-240VAC Humidity Relay Capacity 10A,100-240VAC Input Power Cable Length 120cm/4ft Output Power Cable Length 15cm/6in
It uses whole new pre-wired design without complicated DIY wiring and is accessible for connecting a cooling or heating device directly.It supports hang from the eyelet tab, confirm the installation distances and nails/screws size before installing.
Enjoy more installation flexibility with a 2m(6 ft) waterproof probe cord.Please be careful not to place the probe in an environment with 100% humidity.If ERR appears, please try to insert the probe firmly into the controller.
Be able to connect with refrigeration/ heating and humidifier/dehumidifier equipment at the same time.The controller will start heating/cooling or dehumidification/humidification according to the preset parameters.
When the temperature or humidity reaches the HI or LO you set, an alarm will be issued.If ERR appears, please try to insert the probe firmly into the controller.
It’s ideal to control the temperature and humidity for indoor planting, grow tent, etc.
A comfortable choice to make an warm and comfortable growth environment for reptiles incubating, like lizards, turtle, snake, spider and so on.
It is perfect for your set up to keep wine or kombuchat at a perfect temperature.
【Wide Control Range】Temperature and humidity 2 in 1 sensor; temperature control range is -40℉～248℉, humidity control range is 1%RH～100%RH. It starts cooling or heating, humidifying or dehumidifying according to configured parameters, which helps to keep a desired temperature and humidity anytime.
【Multi-functional Setting】Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set. High or low temperature and humdity alarms are available. And with temperature calibration and compressor delay for protecting cooling device. It can save the original setting values in case accidentally power-off.
【Convenient Design】The temperature and humidity controller has a large LCD screen with simple 3-button, and pre-wired design making it easier for use with plug and play.
【Dual Relay Output】Be able to control temperature and humidity equipments at the same time, one is for temperature controlling and another is for humidity controlling.
【Multiple Use】Widely used for home brewing (refrigerator), fermentation, greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking, ventilator fan, crawl space, turtle enclosure, curing chamber, snake cage, tobacco cage, etc.
Customers say
Customers find the thermostat works well and is easier to use and set up. They consider it worth the price and appreciate its quality, with one customer noting it’s particularly suitable for RV space heaters. The accuracy receives mixed feedback, with some finding it very accurate while others disagree. Customers disagree on its suitability for indoor gardening.
8 reviews for DIGITEN DHTC1011 Humidity and Temperature Controller Plug-in Thermostat Humidistat Outlet Humidity Controller Greenhouse Thermostat Cooling Heating Humidifier Dehumidifier
Add a review
Related Products
$39.99
BVG –
All Good & easy to see
DIGITEN DHTC1011 Humidity and Temperature.Great for grow tent control board. Easy to READ. Very accurate and reliable.This Dual Heat/Humid model can be set for the display backlight to always be on or off after 30 sec. The singles go out after 30 sec. They Can be tricky to learn how to set up, but believe me it is the best once you figure it out. Actually much easier to use and set up than the fancy grow systems like AC.Cheers.
Robert Harris –
Does its job
So far this works as well as my Inkbird controller, pretty simple to setup and operate, the alarm could be slightly louder, and it would be nice if it had a manual silent button for the alarm.For the money this is a great deal, it will work as described, I would buy it again if ever needed.
I JFe –
Steep learning curve
I bought this to make yoghurt using an older Crock Pot. Mama Mia! I thought “how hard could it be? Plug it in set the temp you want put the probe in and walk away”. Oh no. It in not that easy. I suggest you download and read the manual (have NASA on standby). It works very well and is very accurate once you dial it in (I had a 72 hour culture) and the first time the alarm kept going off so make certain that your vessel is thermally secure! Now we are BFF’s it has memorized my settings so it is really now plug and play.
Teresa H Shin –
It worked okay for 6 months. Until now..
It worked okay for 6 months. Now it continuesly on even after setup range and humidity go pass over 95% and won’t stop misting. I almost got my hermit crab suffocated due to extreme humidity.**update**I contacted the customer service and they sent replacement right away. The company stands behind their products.
Charles S –
works well
don’t know what to say other than it works well to run a small heater.
Tony V –
good controller for RV space heater
The sleeping area in our fifth wheel would get hot at night because it was the highest point in the camper.This device solved that problem by allowing us to place the temperature sensor in the sleeping area and control the heater based on the sleeping area’s heating needs and not the lower area.It had no trouble handling the electrical load of our 1500 watt space heater.
Boog –
1600W rating and 1 yr warranty
I have a 1500W heater I am using and this does the job with ease. Calibration is a bit tricky so I am going to use boiling water; have always used ice water and did so to start but I found I needed a bit more accuracy for this latest project. Setup is easy and straight forward. Price is right.
alan –
Great budget controller
This controller has added more life to an old Masterbuilt electric smoker. The controller on it died, but the box was still intact so I didn’t want to just throw it all out. And, I didn’t want to put a lot of money into a PID. This unit was inexpensive, and does what it says it will do. I’m half a dozen uses in (including pork shoulder and brisket), and very happy with it. It might not be as accurate as something many tribes more expensive, but I can live with the temperature swings (around 7-10 degrees from set point) and the BBQ is excellent.